| Product SKUs |
| MBD-H8DA8-2-O |
H8DA8-2 (Standard Retail Pack) |
| MBD-H8DA8-2-B |
H8DA8-2 (Bulk Pack) |
| Physical Stats |
| Form Factor |
Extended ATX |
| Dimensions |
12" x 13.05" (30.5cm x 33.2cm) |
| Processor/Cache |
| CPU |
Dual 1207-pin Socket F |
| Supports up to two Dual-Core AMD Opteron 2000 Series(Socket F) processor(s) |
| System Bus |
1000MHz HyperTransport |
| Chipset |
nVidia MCP55 Pro |
| nVidia IO-55 |
| NEC uPD720400 |
| System Memory |
| Memory Capacity |
Eight 240-pin DIMM sockets |
| Supports up to 32 GB DDR2 667/533/400 MHz memory |
| Single or Dual (recommended) channel memory support |
| For Single CPU: Memory must be populated in CPU1 DIMMs only |
| For Single CPU: Memory must be populated in CPU1 DIMMs only |
| For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
| Memory Type |
DDR2 667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB |
| Memory Voltage |
1.8 V only |
| Error Detection |
Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
|
| SCSI |
Adaptec AIC-7902W Controller |
| Dual-Channel Ultra320 SCSI with Host RAID (Host RAID only supports 4 drives) |
| Host RAID 0, 1, 10, JBOD |
| Zero Channel RAID |
nVidia MCP55 Pro SATA2 3.0Gbps Controller |
| 6 SATA Ports |
| nVidia RAID 2.0 |
| SATA RAID 0, 1, 0+1, 5, JBOD Support |
| Zero Channel RAID |
Support for Zero-Channel RAID with Supermicro All-In-One ZCR Card: AOC-LPZCR1 or AOC-LPZCR2 |
| (Card not included) |
| IPMI |
Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-SIMLP) |
| NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot |
| RMM (Remote Management Module) |
| (Card not included) |
| Network Controllers |
nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Super I/O |
Winbond 83627HF |
| Audio |
HD Audio 7.1 Sound |
| Input / Output |
| SATA |
6 SATA2 ports |
| IDE |
Single EIDE channel support up to two UDMA IDE devices |
| Supports UDMA Mode 5 |
| Supports PIO Mode 4 |
| Supports ATA 100/133 |
| Floppy |
1 Floppy port; 1.44 MB support |
| LAN |
2 RJ45 LAN ports |
| USB |
FUCI |
| Up to 8 USB Ports 2.0 Compliant |
| 4 Rear Ports |
| 4 Internal Headers |
| Serial Ports |
2 Fast UART 16550 serial ports |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Parallel Port |
1 ECP / EPP parallel port |
| Audio |
1 Line In / Line Out / Microphone port |
| 3 Audio Jacks for 7.1 Sound |
| Firewire |
2x 1394 internal headers |
