HomePageProduct PageContact PageNewsletter PageDownload Page

IPC Chassis

19" Cabinet

Power Supplies

CPU Card


Fanless Solutions

Bare Bone System


Special Offer


Mini-ITX SBC with Socket G2 for Intel® 22nm Mobile CPU, DVI-I/Dual HDMI/ LVDS, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA 6Gb/s and Audio

770 top

770 IO





1. Mini-ITX SBC with Socket G2 for Intel® 22nm mobile Ivy Bridge processor
2. Dual-channel 1066/1333/1600MHz DDR3 SDRAM supports up to 16GB
3. HDMI 1.3 compliant, three independent displays supported
4. 3D micro-architecture enhancement supports DX11, OCL 1.1 and OGL 3.1
5. Rich media acceleration for hardware decoding and encoding acceleration
6. Intel® GbE LAN with Intel® AMT 8.0 supported
7. High speed I/O interface for PCIe Gen 3.0 add-on card, USB3.0 and SATA 6Gb/s supported
8. IEI One Key Recovery solution allows you to create rapid OS backup and recovery



CPU Socket G2 for Intel® 3rd generation 22nm mobile processor
PCH Intel® QM77
System Memory Two 204-pin 1066/1333/1600 MHz dual-channel DDR3 SO-DIMMs supported (system max. 16GB)
Ethernet Intel® 82583V PCIe controller
Intel® 82579 PHY with Intel® AMT 8.0 supported
I/O Interface 2 x RS-232
1 x RS-422/485
4 x USB 2.0
4 x USB 3.0
1 x 6-pin header for KB/MS
2 x SATA power connector (5V/12V)
2 x SATA 3Gb/s and 2 x SATA 6Gb/s with RAID 0/1/5/10 support
Digital I/O 8-bit digital I/O
Super I/O Fintek F81866
Infrared 1 x 5-pin header
TPM 2 x 10-pin header
SMBus 1 x 4-pin wafer
Audio Realtek ALC892 HD codec
Display Interfaces DVI-I (VGA+DVI) integrated in the Intel® QM77 (up to 1920 x 1200 @60Hz)
18/24-bit dual-channel LVDS support (up to 1920 x 1200 @60Hz)
Dual HDMI output supported (up to 1920 x 1200 @60Hz)
Expansion 1 x PCIe Mini card slot
1 x PCIe x16
Watchdog Timer Software programmable supports 1~255 sec. system reset
Power Supply Single voltage 12V DC input
1 x External 4-pin DIN DC jack
1 x internal 2x2-pin power connector
Supports AT/ATX mode
Power Consumption 12V@6.08A (2.3GHz Intel® Core™ i7-3610QE with two 1333 MHz 4GB DDR3 memory running 3DMark06 burn in)
Graphic Supports DX11 and OpenGL 3.1
Full MPEG2, VC1, AVC Decode
Temperature Operating: -10°C ~ 60°C
Humidity Operating: 5% ~ 95%, non-condensing
Dimensions 170 mm x 170 mm
Weight GW: 900g/NW: 450g
Embedded Controller iWDD EC
Fan Connector 1 x 4-pin CPU fan connector
1 x 3-pin system fan connector

Ordering Information

Part No. Description
KINO-QM770-R10 Mini-ITX SBC with Socket G2 for Intel® 22nm mobile CPU, DVI-I/dual HDMI/LVDS, dual PCIe GbE, USB 3.0, PCIe Mini, SATA 6Gb/s and Audio
19800-003100-200-RS Dual USB cable
32000-023800-RS KB/MS Y cable
SACF-KIT01-R10 SATA to CF converter board
CF-989A-RS-R12 CPU cooler for mobile socket-G (PGA988) up to 55W processor, copper, 60 x 60 x 27.6mm, RoHS
TPM-IN01-R11 20-pin Infineon TPM module, software management tool, firmware V3.17
32205-003800-100-RS RS-422/485 cable with bracket
33Z00-000031-RS DVI-I to VGA adapter connector

Packing List

1 * KINO-QM770 single board computer 2 * SATA with power output cable (P/N:32801-000100-100-RS)
1 * RS-232 cable with bracket (P/N:19800-000300-100-RS) 1 * I/O shielding (P/N:45014-0037C0-00-RS)
1 * Mini jumper pack 1 * Utility CD
1 * QIG (Quick Installation Guide) 1 * One Key Recovery CD