|
|
X7SPE-HF-D525 |
Mini-ITX compatibleform factor |
 |
1. Intel® Atom™ D525
(Pineview-D) (DMI)
2. Intel® ICH9R Chipset
3.Up to 4GB single channel unbuffered,
non-ECC DDR3 800MHz SO-DIMM
4. 2x Intel 82574L Gigabit LAN
5. 6x SATA (3.0Gbps) Ports
RAID 0, 1, 5, 10 (Windows Only)
6. 1 (x4) PCI-E (in x16 slot)
7. 2 rear USB ports + 3 headers (5 ports)
+ 1 Type A connector
8. Integrated Matrox G200eW Video
9. Integrated IPMI 2.0 |
|
|
Overview |
Specification
| Product SKUs |
 |
| MBD-X7SPE-HF-D525 -O |
- X7SPE-HF-D525 (Standard Retail Pack)
|
| MBD-X7SPE-HF-D525 -B |
- X7SPE-HF-D525 (Bulk Pack)
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 7.5" x 6.75" (19.05cm x 17.15cm)
|
| Recommand chassis |
|
| |
|
| CPU |
- Intel® Atom™ D525 processor
|
| System Bus |
|
| |
|
| Memory Capacity |
- Two 204-pin SO-DIMM sockets
- non-ECC DDR3 800MHz SO-DIMM (Single Channel)
- Some 1066MHz and 1333MHz memory can be used, but will operate at 800MHz
|
| Memory Type |
- DDR3 800MHz unbuffered, non-ECC SO-DIMM
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
|
| Chipset |
|
| SATA |
- Intel ICH9R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- 2x Intel 82574L Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Graphics |
- Onboard Matrox G200eW video
|
| Super I/O |
|
| |
|
| Serial ATA |
- 6 Serial ATA ports ( 3Gbps )
|
| LAN |
|
| USB |
- 8x USB 2.0 / 1.1 compatible
- 2 rear + 3 headers (5 ports) + 1 Type A connector
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Serial Header
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
| PCI-Express |
- 1 (x4) PCI-Express (in x16 slot)
|
| |
| Management |
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
|
| |
|
| CPU |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
- CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN |
- Total of two 4-pin fan headers
- 2 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 2 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
| |
|
| Environmental Spec. |
- Operating Temperature: 0°to 55°C
- Non-operating Temperature: -40°to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
Parts List
| Standard Retail Package |
|
| |
Part Number |
Qty |
Description |
| X7SPE-HF-D525 |
MBD-X7SPE-HF-D525-O |
1 |
X7SPE-HF-D525 Motherboard |
| I/O Cable 1 |
CBL-0044L |
2 |
57.5CM SATA FLAT S-S PBF |
| Driver Disk |
CDR-X7-UP |
1 |
DRIVER CD FOR X7 UP MOTHERBOARDS |
| Screw Bag |
FST-SCRW-0010 |
2 |
STAND-OFF, H=3MM, 2PCS/BAG |
| I/O Shield |
MCP-260-00039-0N |
1 |
STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) |
| Manual |
MNL-1166 |
1 |
X7SPA-L/X7SPE-HF/X7SPE-HFF MANUAL |
|
|
|
