X9SCV-Q

Mini-ITX compatibleform factor

Overview

Specification

Product SKUs
MBD-X9SCV-Q -B	X9SCV-Q (Bulk Pack)

Physical Stats
Form Factor	Mini ITX
Dimensions	6.7" x 6.7", (17.02cm x 17.02cm)

Processor/Cache
CPU	Socket G2 (rPGA 988B) Intel® 2nd Generation Core i7/i5/i3, Pentium, Celeron Mobile processors supported

System Memory
Memory Capacity	2x 204-pin DDR3 SODIMM sockets Supports up to 16 GB DDR3 non-ECC Un-Buffered memory 1333/1066/800MHz
Memory Type	1333/1066/800MHz unbuffered DDR3 SO-DIMM, 204-pin gold-plated DIMMs
DIMM Sizes	8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V

On-Board Devices
Chipset	Intel® QM67 chipset
SATA	4x SATA2 (3Gbps) w/ RAID 0, 1, 5, 10 2x SATA3 (6Gbps) w/ RAID 0, 1
Network Controllers	Intel® 82579LM and 82574L, 2x Gigabit LAN ports Virtual Machine Device Queues High efficient I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio	ALC 889 HD audio
VGA	Intel integrated graphics
Super I/O	Nuvoton NCT6776F

Input / Output
Serial ATA	6 SATA ports 6 SATA hard drives supported
LAN	2x RJ45 Gigabit Ethernet LAN ports
USB	11x USB 2.0 ports total (6x rear + 4x via headers + 1 Type-A)
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 serial port; 1x header

System BIOS
BIOS Type	8Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	ACPI 1.0 / 2.0 Plug and Play (PnP) SMBIOS 2.3 UEFI USB Keyboard support

Expansion Slots
PCI-Express	1 PCI-E x16 Gen 2 slot

Management
Software	IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support Super Doctor III Watch Dog NMI
Power Configurations	ACPI / ACPM Power Management Main Switch Override Mechanism Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode for AC power recovery Internal/External modem ring-on
PC Health Monitoring
CPU	Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of 3 fan headers supporting up to 3 fans Three 4-pin fan headers 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby alert LED
Other Features	Chassis intrusion detection Chassis intrusion header

Parts List

Standard Retail Package
	Part Number	Qty	Description
X9SCV-Q	MBD-X9SCV-Q	1	X9SCV-Q Motherboard
I/O Cables	CBL-0044L	2	57.5CM SATA FLAT S-S PBF
Driver Disk	CDR-X9-UP	1	DRIVER CD FOR X9-UP SERIES MOTHERBOARD
I/O Shield	MCP-260-00044-0N	1	I/O SHIELD FOR X9SCV-Q WITH GASKET