| Product SKUs |
| MBD-X7DB8+-O |
X7DB8+ (Standard Retail Pack) |
| MBD-X7DB8+-B |
X7DB8+ (Bulk Pack) |
| Physical Stats |
| Form Factor |
Enhanced Extended ATX |
| Dimensions |
13.68" x 13" (34.7cm x 33cm) |
| Processor/Cache |
| CPU |
Dual 771-pin LGA Sockets |
| Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: |
Quad-Core Intel®
XeonRProcessor 5300 sequence (Clovertown processor) up to 2.66 GHz |
Dual-Core Intel®
XeonRProcessor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz |
| NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors |
| System Bus |
1333 / 1066 / 667 MHz system bus |
| Operating System Software |
Supports 64-bit Operating Systems |
| Supports 32-bit Operating Systems |
| System Memory |
| Memory Capacity |
Sixteen 240-pin DIMM sockets |
| Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory |
| Dual branch memory bus |
| Memory must be populated in pairs |
| Memory Mirroring supported |
| Memory Type |
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
512 MB, 1GB, 2GB, 4GB |
| Memory Voltage |
1.8 V only |
| 1.5V(AMB) |
| Error Detection |
Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
| Supports IntelR x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices |
| Chipset |
Intel® 5000P (Blackford) chipset |
| MCH + PXH + ESB2 |
| SCSI |
Adaptec AIC-7902 Controller |
| Dual-Channel Ultra320 SCSI (Host RAID supports up to 4 drives) |
| Host RAID 0, 1, & 10 support |
| RAID |
Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR1, AOC-LPZCR2 or AOC-LPZCR3 |
| Optional: (Card not included) |
| RAID 0, 1, 5, 10 |
| SATA |
Intel ESB2 SATA 3.0Gbps Controller |
| RAID 0, 1, 5, 10 support |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
| 200-pin IPMI slot (SIMLP) |
| (Optional: AOC-SIMLP-B(+)) |
| (Optional: AOC-SIMLP-3(+)) with 3rd LAN support |
| Network Controllers |
IntelR (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics |
ATI ES1000 controller with 16 MB of video memory |
| Super I/O |
Winbond 83627HG chip |
| Input / Output |
| Serial ATA |
Six Serial ATA ports |
| Six SATA hard drives supported |
| IDE |
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card |
| Compact Flash (40-pin connector, IDE 1, single channel) slot |
| Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy |
1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN |
2x RJ45 LAN ports |
| USB |
2x USB rear ports |
| 3x USB internal headers |
| Total 5 USB 2.0 Compliant / 1.1 Compliant |
| VGA |
1x VGA Port |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Parallel Port |
1 ECP / EEP parallel port |
| Serial Port / Headers |
1 Fast UART 16550 serial port |
| 1 Fast UART 16550 serial header |
