HomePageProduct PageContact PageNewsletter PageDownload Page

IPC Chassis

19" Cabinet

Power Supplies

CPU Card

Backplane

Fanless Solutions

Bare Bone System

Accessories

Special Offer

X7DVL-E

 

 

 

Specification

Product SKUs
MBD-X7DVL-E-O X7DVL-E (Standard Retail Pack)
MBD-X7DVL-E-B X7DVL-E (Bulk Pack)
Physical Stats
Form Factor ATX
Dimensions 12" x 10" (30.5cm x 25.4cm)
Processor/Cache
CPU Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Quad-Core Intel®
Xeon® Processor 5300 sequence (Clovertown processor)
up to 2.66 GHz
Dual-Core Intel®
Xeon® Processor 5100/5000 sequence (Woodcrest/Dempsey processor)
up to 3.73 GHz
System Bus 1333 / 1066 / 667 MHz system bus
System Memory
Memory Capacity Six 240-pin DIMM sockets
Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
No Memory Mirroring support
Memory Type 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 512 MB, 1GB, 2GB, 4GB
Memory Voltage 1.8 V only
1.5V(AMB)
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset Intel® 5000V (Blackford VS) chipset
MCH + ESB2
SATA Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support
IPMI Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIM1U)
(Optional: AOC-SIMLC(+), AOC-SIM1U(+))
Network Controllers Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics ATI ES1000 controller with 16 MB of video memory
Super I/O Winbond 83627HG chip
Input / Output
Serial ATA Six Serial ATA ports
Six SATA hard drives supported
IDE Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy 1 Floppy controller; 1.44 MB, 2.88 MB
LAN 2x RJ45 LAN ports
USB 2x USB rear ports
2x USB internal headers
Total 6 USB 2.0 Compliant / 1.1 Compliant
VGA 1x VGA Port
Keyboard / Mouse PS/2 keyboard and mouse ports
Serial Port / Header 1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
Parallel Port 1 Header for ECP / EEP parallel port
 
Chassis ( Optimized for X7DVL-E )

1U

HS-1492, HS1577, KIS120,

1.5U

HS15577

2U

HS2577L, KIS261 , IPC202

3U

HS3577

4U

KR407 , IPC4680

5U

KR507

6U

IPC607

Tower

T507
Power supply To ensure system stability, a 500W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
Expansion Slots
PCI-Express 1 (x8) PCI-e slot
1 (x4) PCI-e (using x8) slot
PCI-X 2x 64-bit 133/100MHz PCI-X (3.3V) slots
PCI 2x 32-bit 33MHz PCI (3.3V) slots
Management
Software Optional IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Watch Dog
NMI
Power Configurations ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
CPU Monitors for CPU Cores, +3.3V, +5V, ¡Ó12V
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of six 4-pin fan headers supporting up to 6 fans
6x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
LED CPU / System Overheat LED
Other Features Chassis intrusion detection
Chassis intrusion header

SDDC Support

 

Packing List:

Standard Retail Package
  Part Number Qty Description
X7DVL-E MBD-X7DVL-E-O 1 X7DVL-E Motherboard
Manual(s) MNL-0860 1 Motherboard Manual for X7DVL-E
I/O Cables CBL-0022L 1 ATX Floppy Cable
CBL-0036L-02
1 ATA 66/100 IDE LP Cable
CBL-0044L 6 2ft. Amphenol, SATA Cable
Driver Disk CDR-X7 1.02 1 Version 1.02 CD or later
I/O Shield CSE-PT07L 1 Motherboard I/O Shield
Retention SKT-0159 1 CPU Retention Module