HomePageProduct PageContact PageNewsletter PageDownload Page

IPC Chassis

19" Cabinet

Power Supplies

CPU Card

Backplane

Fanless Solutions

Bare Bone System

Accessories

Special Offer

X7DVL-L

 

Specification

Product SKUs
MBD-X7DVL-L-O X7DVL-L (Standard Retail Pack)
MBD-X7DVL-L-B X7DVL-L (Bulk Pack)
Physical Stats
Form Factor Proprietary
Dimensions 9.6" x 10" (24.4cm x 25.4cm)
Processor/Cache
CPU Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Quad-Core Intel®
Xeon® Processor 5300 sequence (Clovertown processor)
90 watt or lower power
Dual-Core Intel®
Xeon® Processor 5100 sequence (Woodcrest processor)
90 watt or lower power
System Bus 1333 / 1066 / 667 MHz system bus
System Memory
Memory Capacity Four 240-pin DIMM sockets
Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
Memory must be populated in pairs
Memory Type 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 256 MB, 512 MB, 1GB, 2GB, 4GB
Memory Voltage 1.8V only
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel®R x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset Intel®5000V (Blackford VS) chipset
MCH + ESB2
SATA Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows Only)
Network Controllers Two Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics XGI Volari Z7 16MB
Network Controllers Intel® 82575EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
Clock Generator ICS932S401EGLF
Super I/O Winbond 83627HG chip
Input / Output
Serial ATA Four Serial ATA ports
Four SATA hard drives supported
IDE Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy 1 Floppy controller; 1.44 MB
LAN 2x RJ45 LAN ports
USB 2x USB rear ports
1x USB internal headers for 2 ports
Total 4 USB 2.0 Compliant / 1.1 Compliant
VGA 1x VGA Port
Keyboard / Mouse PS/2 keyboard and mouse ports
Serial Port / Header 1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
 
Chassis ( Optimized for X7DVL-L )

 

 

 

 

 

 

 

   
System BIOS
BIOS Type 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0
USB Keyboard support
Hardware BIOS Virus protection
Management
Software Super Doctor III
Watch Dog
NMI
Power Configurations ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
CPU Monitors for CPU Cores,+1.8V, +3.3V, +5V, ¡Ó12V, +3.3V Standby, +5V Standby, VBAT
4-Phase-switching voltage regulator
FAN Total of five 4-pin and 3-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 5x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
LED CPU / System Overheat LED
Suspend-state indicator LED
+5V Standby alert LED
Other Features Chassis intrusion detection
Chassis intrusion header
SDDC Support

 

 

 

Packing List:

Standard Retail Package
  Part Number Qty Description
X7DVL-L MBD-X7DVL-L-O 1 X7DVL-L Motherboard
Manual(s) MNL-0938 1 Motherboard Manual for X7DVL-L
I/O Cables CBL-0022L 1 ATX Floppy Cable
CBL-0036L-03 1 ATA 66/100 IDE LP Cable
CBL-0044L 4 2ft. Amphenol, SATA Cable
Driver Disk CDR-X7 1.10 1 Version 1.10 CD or later
I/O Shield CSE-PT07L 1 Motherboard I/O Shield
Retention SKT-0159L 1 CPU Retention Module