| Chassis ( Optimized for X7SBA ) |
| 1U |
HS1492 / HS1577 / KIS-120 / KIS130 |
2U |
HS-2577L / KIS-261 |
3U |
HS-3577 |
4U |
KR407 |
5U |
KR507 |
Tower |
T507 |
| Expansion Slots |
| PCI-Express |
1 (x8) PCI-E (using x16) slot |
| PCI - X |
2x 64-bit 133 / 100MHz PCI-X (3.3V) slot |
| PCI |
4x 32-bit 33MHz PCI (5V) slot |
| System BIOS |
| BIOS Type |
16Mb Flash EEPROM with Phoenix BIOS® |
| BIOS Features |
Plug and Play (PnP) |
| DMI 2.3 support |
| PCI 2.2 |
| ACPI 1.0/2.0 |
| USB Keyboard support |
| SMBIOS 2.3 |
| Management |
| Software |
IPMI (Intelligent Platform Management Interface) 1.5 / 2.0 |
| Super Doctor III |
| Watch Dog |
| NMI |
| W83793 H/W Monitor |
| Power Configurations |
ACPI/APM Power Management |
| Main Switch Override Mechanism |
| Wake-On-Ring (WOR) header |
| Wake-On-LAN (WOL) header |
| Keyboard Wakeup from Soft-Off |
| Power-on mode control for AC power loss recovery |
| Internal / External Modem Rign-on |
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores +1.8V, +3.3V, +5V, ¡Ó12V, 3.3V Standby, 5V Standby, VBAT |
| CPU 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V |
| Adjustable CPU clock frequency ratio |
| FAN |
Total of six 4-pin fan headers |
| 6 fans with tachometer monitoring |
| Status monitor with firmware speed control |
| Low noise fan speed control |
| Status monitor for on/off control |
| Support 3-pin fans (without speed control) |
| Pulse Width Modulated (PWM) fan connector |
| Temperature |
Monitoring for CPU and chassis environment |
| CPU thermal trip support |
| Thermal Monitor 2 (TM2) support |
| PECI |
| LED |
CPU / System Overheat LED |
| Standby Power alert LED |
| Other Features |
Chassis Intrusion Detection |
| Chassis Intrusion Header |
