|
|
X7SBL-LN1/LN2 |
|
Features:
-
Dual/Quad core Xeon 3000/3200, future Wolfdale, Yorkfield
-
Intel 3200 (Bigby-V) chipset
-
1333/1066/800 MHz System Bus
-
8 GB UNB ECC DDR2 800/667 MHz
-
1 Universal PCI-E x8 or 1 PCI 33
-
-
6 SATA w/ ICH9R RAID 0, 1, 5,10
-
2 Gigabit LAN (LN2) , 1GLAN (LN1)
-
-
-
ATI ES1000 Graphics 32 MB DDR2
-
7 USB ports (2 rear, 2 headers, 1 on-board connector)
-
-
-
1U riser card CSE-RR1U-32L (PCI 33)
-
1U riser card CSE-RR1U-E8 (PCI-E x8)
-
-
|
|
|
Specification
| Product SKUs |
| MBD-X7SBL-LN2-O |
X7SBL-LN2 (Standard Retail Pack) |
| MBD-X7SBL-LN2-B |
X7SBL-LN2 (Bulk Pack) |
| Physical Stats |
| Form Factor |
MicroATX (uATX) |
| Dimensions |
9.6" width x 9.6 " length , (24.4cm x 24.4cm), 6 layers |
| Processor/Cache |
| CPU |
Single LGA775 ZIF Socket |
| Supports a Quad-Core Intel® Xeon® 3200 Series processor |
| Supports a Dual-Core Intel® Xeon® 3000 Series processor |
| Supports an Intel® Core 2 Quad Series processor |
| Supports an Intel® Core2 Duo Series processor |
| System Bus |
1333 / 1066 / 800 MHz system bus |
| System Memory |
| Memory Capacity |
Four 240-pin DIMM sockets |
| Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 800/667MHz memory (Dual Channel) |
| Memory Type |
DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes |
256 MB, 512 MB, 1 GB, 2GB |
| Memory Voltage |
1.8V only |
| On-Board Devices |
| Chipset |
Intel® 3200 chipset |
| ICH9® chipset |
| Serial ATA |
Intel® ICH9® SATA controller built-in |
| RAID 0, 1, 5, 10 |
| SCSI |
Support for 1U Intelligent Platform Management Interface v.2.0 / 1.5 |
| IPMI |
Support for 1U Intelligent Platform Management Interface v.2.0 / 1.5 |
| (Optional: AOC-SIMLC-HTC) |
| Network Controllers |
1x Intel® 82573V Gigabit PCI-Express Ethernet |
| 1x Intel® 82573L Gigabit PCI-Express Ethernet |
| Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output |
| VGA |
On-board XGI Volari Z9S 32MB graphics |
| Super I/O |
Winbond 83627HG chip |
| Clock Generator |
CK505 |
| Input / Output |
| Serial ATA |
Six Serial ATA ports (3 Gbps performance) |
| Six SATA hard drives supported |
| Floppy |
1 Floppy controller; 1.44 MB |
| LAN |
2 x RJ45 LAN port |
| USB |
7x USB 2.0 / 1.1 compatible |
| 2 rear + 2 headers ( 4 ports ) + 1 on-board |
| VGA |
1x VGA Port |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Ports |
1x Fast UART 16550 serial port |
| 1x Header |
|
|
| Chassis( Optimized for X7SBL-LN1/LN2 ) |
2U |
|
3U |
|
4U |
|
5U |
|
Tower |
|
| Expansion Slots |
| PCI-Express |
1 (x8) PCI-E slot |
| 1 (x4) PCI-E (using x8) slot |
| PCI - X |
2x 32-bit 33MHz PCI (5V) slot |
| System BIOS |
| BIOS Type |
8Mb Flash EEPROM with Phoenix BIOSR |
| BIOS Features |
Plug and Play (PnP) |
| DMI 2.3 support |
| PCI 2.2 |
| ACPI 1.0/2.0 |
| USB Keyboard support |
| SMBIOS 2.3 |
| Management |
| Software |
Optional IPMI (Intelligent Platform Management Interface) 2.0 |
| Super Doctor III |
| Watch Dog |
| NMI |
| W83793 H/W Monitor |
| Power Configurations |
ACPI/APM Power Management |
| Main Switch Override Mechanism |
| Wake-On-Ring (WOR) header |
| Wake-On-LAN (WOL) header |
| Keyboard Wakeup from Soft-Off |
| Power-on mode control for AC power loss recovery |
| Internal / External Modem Rign-on |
| Suspend to RAM (STR) |
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores +1.8V, +3.3V, +5V, ¡Ó12V, 3.3V Standby, 5V Standby, VBAT |
| CPU 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V |
| FAN |
Total of six 4-pin fan headers |
| 6 fans with tachometer monitoring |
| Status monitor with firmware speed control |
| Low noise fan speed control |
| Status monitor for on/off control |
| Support 3-pin fans (without speed control) |
| Pulse Width Modulated (PWM) fan connector |
| Temperature |
Monitoring for CPU and chassis environment |
| CPU thermal trip support |
| Thermal Monitor 2 (TM2) support |
| PECI |
| LED |
CPU / System Overheat LED |
| Suspend state indicator LED |
| Standby Power alert LED |
| Other Features |
Chassis Intrusion Detection |
| Chassis Intrusion Header |
|
Packing List:
| Standard Retail Package |
| |
Part Number |
Qty |
Description |
| X7SBL-LN2 |
MBD-X7SBL-LN2-O |
1 |
X7SBL-LN2 Motherboard |
| Manual(s) |
MNL-0981 |
1 |
Motherboard Manual for X7SBL-LN2 |
| I/O Cables |
CBL-0022L
|
1 |
ATX Floppy Cable |
| CBL-0044L |
6 |
SATA Cable (2Ft.) |
| Driver Disk |
CDR-X7-UP |
1 |
Version 1.01 (or newer) CD |
| I/O Shield |
CSE-PT07L |
1 |
I/O Shield for X7SBL-LN2 |
| Optional Parts List |
| |
Part Number |
Qty |
Description |
| Heat Sink |
SNK-P0016 |
|
1U, LGA775, Passive Heatsink |
| I/O Cables |
RSC-RR1U-32L
|
|
1U 32-bit PCI Riser Card (Full height, full length) |
| CSE-RR1U-E8 |
|
1U Universal (SXB-E) Slot to PCI-E Slot Riser Card for X7SBL-LN2 |
|
|
|
|
|
