|
|
X8DTL-i
|
Features:
- Dual Intel® 5500 series Xeon® Quad/Dual-Core, with QPI up to 6.4 GT/s
- Intel® 5500 (Tylersburg) Chipset
- Up to 24GB DDR3 1333/ 1066/ 800MHz ECC Registered / Unbuffered DIMM
- Dual Intel® 82574L Gigabit Ethernet Controller
- 6x SATA2 (3 Gbps) Ports viaICH10R Controller
- 2 (x8) PCI-E 2.0 (1 in x16 slot),1 (x4) PCI-E 2.0 (in x8 slot),1 (x4) PCI-E (in x8 slot),2x PCI 33MHz slots
- Integrated Matrox G200eW Graphics
|
|
|
|
|
IO Layout |
|
 |
|
Specification
|
MBD-X8DTL-i -O |
- X8DTL-i (Standard Retail
Pack)
|
|
MBD-X8DTL-i -B |
|
|
Form Factor |
|
|
Dimensions |
- 12" x 10" (30.5cm x 25.4cm)
|
|
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two
Intel® 64-bit Xeon® processor(s) of
the same type below:
- Quad-Core
Intel®
Xeon®Processor 5500 sequence (Nehalem-EP
processor)
|
|
QPI |
|
|
Memory Capacity |
- 6x 240-pin DIMM sockets
- Supports up to 24 GB 1333 /
1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB 1333 /
1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
|
|
Memory Type |
- 1333 / 1066 / 800MHz ECC
Registered / ECC Unbuffered DDR3 SDRAM
72-bit, 240-pin gold-plated DIMMs
|
|
DIMM Sizes |
|
|
Memory Voltage |
|
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
- Supports Intel® x4 and x8
Single Device Data Correction (SDDC)
|
|
Chipset |
- Intel® 5500 (Tylersburg)
chipset
- ICH10R + IOH-24D
|
|
SATA |
- Intel ICH10R SATA 3.0Gbps
Controller
- RAID 0, 1, 5, 10 support
(Windows)
- RAID 0, 1, 10 support
(Linux)
|
|
Network Controllers |
- 2x Intel® 82574L Gigabit
Ethernet Controllers
- Supports 10BASE-T,
100BASE-TX, and 1000BASE-T, RJ45 output
|
|
Graphics |
|
|
Super I/O |
|
|
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives
supported
|
|
LAN |
|
|
USB |
- 2x USB rear ports
- 1x USB on-board
- 2x USB internal headers
- Total 5 USB 2.0 Compliant
|
|
VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Port / Header |
- 1 Fast UART 16550 serial
port
- 1 Fast UART 16550 serial
header (Option)
|
|
|
|
|
|
| 2U Chassis |
HS2577L ,
KIS261 |
| 3U Chassis |
HS3577 |
| 4U Chassis |
IPC4680A |
| 5U Chassis |
KR507 |
| 6U Chassis |
IPC607 |
| Tower |
T507 |
|
Important Chassis Notes |
- To ensure system stability,
a 550W (minimum) ATX power supply
[Two 8-pin (+12V) and 24-pin are required]
|
|
PCI-Express |
- 2 (x8) PCI-E 2.0 (1 in x16
slot)
- 1 (x4) PCI-E 2.0 (in x8
slot)
- 1 (x4) PCI-E (in x8 slot)
|
|
PCI |
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with
AMI® BIOS
|
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
Software |
|
|
Power Configurations |
- ACPI / ACPM Power
Management
|
|
CPU |
- Monitors for CPU Cores,
+1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V
Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage
regulator
|
|
FAN |
- Total of six fan headers
supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer
status monitoring
- Support 3-pin fans (w/o
speed control)
- Low noise fan speed control
(4-pin fan only)
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- Thermal Control for 6x fan
connectors
- PECI
|
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
Packing List:
| |
Part Number |
Qty |
Description |
| X8DTL-i |
MBD-X8DTL-i -O |
1 |
X8DTL-i Motherboard |
| I/O Cable 1 |
CBL-0044L |
6 |
57.5CM SATA FLAT S-S PBF |
| Driver Disk |
CDR-X8 1.01 |
1 |
DRIVER CD FOR X8 MOTHERBOARD |
| I/O Shield |
CSE-PT7L |
1 |
I/O SHIELD FOR DUAL LAN MOTHERBOARD, PB FREE |
| Manual |
MNL-1076 |
1 |
X8DTL-3/I MANUAL |
|
|
|
|
|
