|
|
X8SAX
|
Features:
- Intel® Core™ i7 / i7 Extreme Edition,and Intel® Xeon® 5500/3500 series processors (QPI up to 6.4 GT/s)
- Intel® X58 Express Chipset
- Up to 24GB DDR3 1333/1066/800 ECC / non-ECC Un-Buffered DIMM
- Intel® Dual 82574L Gigabit Ethernet Controller
- 6x SATA (3.0Gbps) Ports RAID 0, 1, 5, 10
- 2 (x16) PCI-Express 2.0,1 (x4) PCI-Express (using X8 slot),2x 64-bit 133/100MHz PCI-X,1x 32-bit PCI Slots 7. Realtek ALC883 7.1 HD Audio
- 12x USB 2.0 Ports
- 2x IEEE 1394a Headers
|
|
|
|
|
IO Layout |
|
 |
|
Specification
|
MBD-X8SAX -O |
- X8SAX (Standard Retail
Pack)
|
|
MBD-X8SAX -B |
|
|
Form Factor |
|
|
Dimensions |
- 12" x 10" (30.5cm x 25.4cm)
|
|
CPU |
- LGA 1366 Socket
- Intel® Core™ i7-965
Extreme Edition
- Intel® Core™ i7
series
- Intel® Xeon® 5500
series
- Intel® Xeon® 3500
series
|
|
System Bus |
|
|
Memory Capacity |
- Supports up to 24 GB 1333 /
1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered
memory
- Three Channel memory bus
- 6 DIMM sockets
|
|
Memory Type |
- 1333 / 1066 / 800MHz Un-
Buffered ECC / non-ECC DDR3 SDRAM 72-bit,
240-pin gold-plated DIMMs
|
|
DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB
|
|
Memory Voltage |
|
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
- Supports Intel® x4 and x8
Single Device Data Correction (SDDC)
|
|
Chipset |
- Intel® X58 Express chipset
- ICH10R + PXH/V
|
|
SATA |
- Intel ICH10R SATA 3.0Gbps
Controller
- RAID 0, 1, 5, 10 support
|
|
Network Controllers |
- Dual Intel® 82574L Gigabit
Ethernet Controller
- Supports 10BASE-T,
100BASE-TX, and 1000BASE-T, RJ45 output
|
|
Audio |
- Realtek ALC883 7.1 HD audio
|
|
Super I/O |
|
|
Clock Generator |
|
|
Serial ATA |
- 6 Serial ATA ports
- 6 SATA hard drives
supported
|
|
Floppy |
- 1 Floppy controller; 1.44
MB
|
|
LAN |
|
|
USB |
- 8x USB rear ports
- 2x USB on-board
- 1x USB internal header(2
ports)
- Total 12 USB 2.0 Compliant
|
|
Audio |
- Realtek ALC883 7.1 HD audio
- 1x S/PDIF digital output
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Port / Header |
- 2 Fast UART 16550 serial
header
|
|
|
|
| Chassises |
HS2577L,
KIS261,
HS3577
KR407,
KR4680A,
KR507 |
|
Important Chassis Notes |
- To ensure system stability, a 550W
(minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| PCI-Express |
- 2 (x16) PCI-e 2.0 slots
- 1 (x4) PCI-e slot (using x8 slot)
|
| PCI-X |
- 2x 64-bit 133/100MHz PCI-X (3.3V) slots
|
| PCI |
|
| BIOS
Type |
- 4Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS
Features |
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Software |
- Super Doctor III
- Watch Dog
- NMI
|
| Power
Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Keyboard Wakeup from Soft-Off
- Power-on mode for AC power recovery
- Internal/External modem ring-on
- Suspend to RAM (STR)
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V,
±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset
Voltages.
- 6-Phase-switching voltage regulator with
auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of six fan headers supporting up to 6
fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5V Standby alert LED
|
| Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
Packing List:
| |
Part Number |
Qty |
Description |
| X8SAX |
MBD-X8SAX -O |
1 |
X8SAX Motherboard |
| Manual(s) |
MNL-1063 |
1 |
Motherboard Manual for X8SAX |
| I/O Cables |
CBL-022L
CBL-0044L
CBL-0173L
|
1
6
1
|
ATX Floppy Cable
2ft. Amphenol, SATA Cable
Internal to External Cable for 1394 Connector
|
| Driver Disk |
CDR-X8-UP 1.00 |
1 |
Version 1.00 CD or later |
| I/O Shield |
MCP-260-00030-0N |
1 |
Motherboard I/O Shield |
|
|
|
|
|
