HomePageProduct PageContact PageNewsletter PageDownload Page

IPC Chassis

19" Cabinet

Power Supplies

CPU Card

Backplane

Fanless Solutions

Bare Bone System

Accessories

Special Offer

FSP500-60PFG


FSP300-70PFL80 Bronze

 

Feature :
  • Meet 80 Plus BRONZE
  • Build in Active PFC Function
  • High Efficiency
  • Low Ripple & Noise
  • With OVP, OCP and SCP Protection
  • Peak Current @ 12V & 5Vsb output

Safety Approval

CBCEFCCTUVUL

FSP500-60PFG Datasheet

INPUT SPECIFICATION

Input Voltage:
90 - 264Vac
Input Frequency:
47 - 63Hz
Input Current:
Max 8.0A @ 115V for 460W & 500W Series
Earth leakage current:
Max.3.5mA @ 264 Vac / 60Hz

OUTPUT SPECIFICATION

Output Voltage / Current:
See Product Series List
Output Regulation Load:
+3.3V, +5V, +12V, 5VSB : ±5% -12V, -5V: ±10%
Ripple and Noise:
 
Output Rise Time:
 
Over Voltage Protection:
     

+3.3Vdc output: Protection point 3.5V~4.5V +5Vdc output: Protection point 5.7V~6.82V +12Vdc output: Protection point 13.4V~15.6V

 

Short Circuit Protection:
Output short circuit is  defined to be a short circuit load of less than 0.1 ohm
Hold Up Time:
Min. 17mS @115Vac/230Vac, Full Load
ENVIROMENTAL  
Operating Temperature
0°C~50°C
Storage Temperature
- 20°C~80°C
Operating Humidity
5~85%, RH, Non-Condensing
Storage Humidity
5~95%, RH, Non-Condensing
MTBF
Min. 100,000 hours at full load at 25°C ambient, predicated by MIL-HDBK-217F

EMC & Safety

Safety Standard:
EN61000-3-2
EMI:
FCC part 15 Subpart J , class B 115Vac operation
CISPR 22 Class B 230Vac operation

Series List

Model Name Total Output Watt. Output Current Dimension (mm)
+3.3V +5V +12V1 +12V2 -12V -5V +5Vsb
Min Max Min Max Min Max Min Max Min Max Min Max Min Max L W H
FSP500-60PFG 500W 0.1 24 0.2 20 0.1 16 0.5 16 0 0.5 0 0.3 0 3 140 150 86

Note:

-12V,+3.3V,+5V,+12V will have the regulation±10% when all load take off. FSP250-60PFG & FSP300-60PFG: 12V2DC supports processer power requirements and must have a separate current limit and provide 13A peak current for 10ms; minimum voltage during peak is>10.8VDC. FSP250-60PFG: Total combined output of 3.3V and 5V is ≦97W, total output shall not exceed 250watts. FSP300-60PFG: Total combined output of 3.3V and 5V is ≦103W, total output shall not exceed 300watts. FSP350-60PFG: The +3.3V and+ 5V total output shall not exceed 130watts and the +3.3V, + 5V,+12V1, +12V2 total output shall not exceed 335watts. Total output shall not exceed 350watts. FSP400-60PFG: The +3.3V and +5V total output shall not exceed 130 watts and total output shall not exceed 400 watts. FSP460-60PFG: The +3.3V and +5V total output shall not exceed 150 watts and total output shall not exceed 460 watts. FSP500-60PFG: The +3.3V and +5V total output shall not exceed 150 watts and total output shall not exceed 500 watts.

Price without AC cord