HomePageProduct PageContact PageNewsletter PageDownload Page

IPC Chassis

19" Cabinet

Power Supplies

CPU Card

Backplane

Fanless Solutions

Bare Bone System

Accessories

Special Offer

FSP600-80PSA(SK) / FSP700-80PSA(SK)


FSP600-80PSA80 Bronze

 

Feature :
  • Meet 80 Plus BRONZE
  • Build in Active PFC Function
  • High Efficiency
  • Low Ripple & Noise
  • With OVP, OCP and SCP Protection

Safety Approval

CBCEFCCTUVUL

FSP600-80PSA / FSP700-80PSA: click for Datasheet download

INPUT SPECIFICATION

Input Voltage:
90 - 264Vac
Input Frequency:
47 - 63Hz
Input Current:
Max. 10.0A @ 115V, Max. 5.0A @ 230V :  FSP600-PSA 
Max. 12.0A @ 115V, Max. 6.0A @ 230V :  FSP700-PSA
Earth leakage current:
Max.3.5mA @ 264 Vac / 60Hz

OUTPUT SPECIFICATION

Output Voltage / Current:
See Product Series List
Output Regulation Load:
+3.3V, +5V, +12V, 5VSB : ±5%  -12V:  ±10% 
Ripple and Noise:
+3.3V, +5V, +5VSB: 50mV p-p / +12V, -12V: 120mV p-p
Output Rise Time:
115V-rms/230V-rms  +  5V: 20ms Maximum  115V-rms/230V-rms  +12V: 20ms Maximum
Over Voltage Protection:
  • 3.3Vdc output: Protection point 3.9V~4.5V
  • +5Vdc output: Protection point 5.7V~6.5V
  • +12Vdc output: Protection point 13.3V~16.7V
Short Circuit Protection:
Output short circuit is  defined to be a short circuit load of less than 0.1 ohm
Hold Up Time:
Min. 16mS @115Vac/230Vac, Full Load
ENVIROMENTAL  
Operating Temperature
0°C~50°C
Storage Temperature
- 20°C~80°C
Operating Humidity
10~90%, RH, Non-Condensing
Storage Humidity
5~95%, RH, Non-Condensing
MTBF
Min. 100,000 hours at full load at 25°C ambient, predicated by MIL-HDBK-217F

EMC & Safety

Safety Standard:
EN60950-1  UL60950-1
EMI:
EN55022, Class B Conducted / Class B Radiated  FCC Part15, Class B

Series List

Model Name Total Output Watt. Output Current Dimension (mm)
+3.3V +5V +12V1 +12V2 +12V3 +12V4 -12V +5VSB
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max L W H
FSP600-80PSA 600W 1.5 25 1 25 1 16 1 16 1 16 0.5 16 0 0.5 0.1 4 140 150 86
FSP700-80PSA 700W 1.5 24 1 30 1 16 1 16 1 16 0.5 16 0 0.5 0.1 4 140 150 86

 

Note:

-12V,+3.3V,+5V,+12V will have the regulation±10% when all load take off.
FSP600-80PSA:
(1)Maximum continuous tatal DC output should exceed 600W
(2)Maximum continuous combined load on +3.3VDC and +5VDC output shall not exceed 150W
(3)Maximum combined for the 12V output shall be 48A
FSP700-80PSA:
(1)Maximum continuous tatal DC output should exceed 700W
(2)Maximum continuous combined load on +3.3VDC and +5VDC output shall not exceed 170W
(3)Maximum combined for the 12V output shall be 56A

Price without AC cord